Substations
-main_image.jpg)
-main_image.jpg)
MCU2
Multi-device control unit for MPD 800
The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts optical signals, which are generated by the PD measurement device and transmitted to the MCU2 control unit via fiber optic cables, into the standard USB electrical communication signal. The MCU2 control unit is connected to the PC using the supplied USB cable.
The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts optical signals, which are generated by the PD measurement device and transmitted to the MCU2 control unit via fiber optic cables, into the standard USB electrical communication signal. The MCU2 control unit is connected to the PC using the supplied USB cable.
-main_image.jpg)
MPP 600
Alternative power supply for MPD measurement devices
The MPP battery pack is used to power MPD 500 and MPD 600 partial discharge (PD) measurement devices for over 20 hours of continuous operation without the need for AC power. This enables convenient PD measurement anytime and anywhere. Interference induced via the voltage supply is also effectively avoided. The power pack includes a battery charger and power cord for recharging.
The MPP battery pack is used to power MPD 500 and MPD 600 partial discharge (PD) measurement devices for over 20 hours of continuous operation without the need for AC power. This enables convenient PD measurement anytime and anywhere. Interference induced via the voltage supply is also effectively avoided. The power pack includes a battery charger and power cord for recharging.
-main_image.jpg)
Measurement cable set
A set of six measurement cables consisting of
• Two pairs of red/black measurement cables marked with “I” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• One pair of red/black measurement cables marked with “V” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• Two pairs of red/black measurement cables marked with “I” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• One pair of red/black measurement cables marked with “V” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
-main_image.jpg)
Mini Wi-Fi USB adapter
CMC test sets with NET-2 interface board can be controlled wirelessly from a Windows PC/laptop or an Android tablet. To establish a Wi-Fi connection the dedicated Wi-Fi USB adapter is needed.
• Wi-Fi N150: Complies with wireless 802.11b/g/n standards with data rate up to 150Mbps
• Compact design:
• Wi-Fi N150: Complies with wireless 802.11b/g/n standards with data rate up to 150Mbps
• Compact design:
- Dimensions: 7.1 x 14.9 x 18.5 mm (0.3 x 0.6 x 0.7 in)
- Operating temperature: 0 - 40 °C
-main_image.jpg)
-main_image.jpg)
RBP1
The RBP1 is a rechargeable lithium-ion battery pack supplied with our measurement devices for up to 16 hours of continuous testing without the need for connecting to the local power supply. Multiple batteries can be connected via daisy chain for longer testing periods.
Supplies power to MPD 800 measurement devices for several hours of continuous testing without the need for an AC power connection in test labs or in the field.
Supplies power to MPD 800 measurement devices for several hours of continuous testing without the need for an AC power connection in test labs or in the field.
-main_image.jpg)
OTMC 100p
• GNSS Antenna, GNSS Receiver and CPU combined in a compact, weatherproof outdoor unit
• Zero in-house footprint and no RF cabling required
• Connection via a single Ethernet cable with automatic cable length compensation up to 100 meters
• Multi-protocol support (PTP and NTP timing networks)
• Easy setup and control through a secure and platform independent web interface
• Low cost of ownership due to extremely low power consumption
• Powered over Ethernet – Easy installation, no additional power supply needed
• Zero in-house footprint and no RF cabling required
• Connection via a single Ethernet cable with automatic cable length compensation up to 100 meters
• Multi-protocol support (PTP and NTP timing networks)
• Easy setup and control through a secure and platform independent web interface
• Low cost of ownership due to extremely low power consumption
• Powered over Ethernet – Easy installation, no additional power supply needed
Submit your product request directly and our staff will contact you to provide you with all relevant information.
Why choose our products?
- High quality
- Resistant to external factors
- Competitive price