Electric
CP CR600
• Maximum test voltage of 15 kV
• Easy to transport due to its modular and lightweight concept (48 kg / 106 lbs)
• Convenient and flexible test setup, ideal for test objects with limited access
• Low noise level, ideal for partial discharge measurements
• Several units can be connected in parallel
• Easy to transport due to its modular and lightweight concept (48 kg / 106 lbs)
• Convenient and flexible test setup, ideal for test objects with limited access
• Low noise level, ideal for partial discharge measurements
• Several units can be connected in parallel
HGT1
• Mobile solution – simplifies measurements at various locations inside and outside the substation
• Frequency-selective measurement for effective noise suppression
• Simulation of body and shoe resistance for step and touch voltage testing
• Even more powerful with Primary Test Manager™ (PTM)
• Fully automated due to GPS test point tracking and test current detection
• Real-time assessment of step and touch voltages according to EN 50522 or IEEE 80
• Frequency-selective measurement for effective noise suppression
• Simulation of body and shoe resistance for step and touch voltage testing
• Even more powerful with Primary Test Manager™ (PTM)
• Fully automated due to GPS test point tracking and test current detection
• Real-time assessment of step and touch voltages according to EN 50522 or IEEE 80
IOB1
• Enables advanced timing tests in real time on circuit breakers with more than 6 auxiliary contacts and several trip and close coils without rewiring
• Makes sophisticated timing analyses possible such as CO sequence with overlapping trip/close coil operation
• Offers six input channels for real-time data transfer between 6 auxiliary contacts and CIBANO 500 (EtherCAT® communication)
• Offers six output channels for both control and analysis of CB trip or close coils or motors
• Makes sophisticated timing analyses possible such as CO sequence with overlapping trip/close coil operation
• Offers six input channels for real-time data transfer between 6 auxiliary contacts and CIBANO 500 (EtherCAT® communication)
• Offers six output channels for both control and analysis of CB trip or close coils or motors
Stator Core Measurement Upgrade Option
• Semi-automatic scanning of the stator core
• Measurement and excitation in one solution
• Frequency-variable injection from 15 to 400 Hz
• User-friendly work flow using Primary Test Manager (PTM) software
• Automated reporting including results, graphs and heat map
• Easily extendable excitation cable to meet specific measurement requirements
• Measurement and excitation in one solution
• Frequency-variable injection from 15 to 400 Hz
• User-friendly work flow using Primary Test Manager (PTM) software
• Automated reporting including results, graphs and heat map
• Easily extendable excitation cable to meet specific measurement requirements
RIV1
• Adjustable signal frequency and output voltage to match application requirements
• Application-specific versions of RIV calibrators and measurement impedances ensure fully compliance to applicable measurement standards
• Complies with all parts of RIV related NEMA, IEEE, IEC and CISPR standards
• Independent power supply with built-in battery
• Application-specific versions of RIV calibrators and measurement impedances ensure fully compliance to applicable measurement standards
• Complies with all parts of RIV related NEMA, IEEE, IEC and CISPR standards
• Independent power supply with built-in battery
CMC 256plus
• Protection test set and universal calibrator in one device
• Testing of all relay generations – electromechanical, static, numerical, IEC 61850
• Highly accurate test signals. For meter testing: The sources are the reference – no additional reference meters are required
• Integrated network for testing IEC 61850 IEDs
• 10-channel analog measurement and transient recording functionality (option)
• Testing of all relay generations – electromechanical, static, numerical, IEC 61850
• Highly accurate test signals. For meter testing: The sources are the reference – no additional reference meters are required
• Integrated network for testing IEC 61850 IEDs
• 10-channel analog measurement and transient recording functionality (option)
Submit your product request directly and our staff will contact you to provide you with all relevant information.
Why choose our products?
- High quality
- Resistant to external factors
- Competitive price