Produktet
-main_image.jpg)
-main_image.jpg)
LLX1 Low Level Output Accessory
LLX1 is the ideal solution for testing protection and measurement devices with inputs for voltage and current sensors.
A wide range of cables are available for easily connecting LLX1 to different devices that have specific connectors and pinouts. In addition to simulating the phase voltages and currents, LLX1 is also capable of simulating residual voltage and current for dedicated inputs.
A wide range of cables are available for easily connecting LLX1 to different devices that have specific connectors and pinouts. In addition to simulating the phase voltages and currents, LLX1 is also capable of simulating residual voltage and current for dedicated inputs.
-main_image.jpg)
-main_image.jpg)
-main_image.jpg)
-main_image.jpg)
MCU2
Multi-device control unit for MPD 800
The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts optical signals, which are generated by the PD measurement device and transmitted to the MCU2 control unit via fiber optic cables, into the standard USB electrical communication signal. The MCU2 control unit is connected to the PC using the supplied USB cable.
The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts optical signals, which are generated by the PD measurement device and transmitted to the MCU2 control unit via fiber optic cables, into the standard USB electrical communication signal. The MCU2 control unit is connected to the PC using the supplied USB cable.
-main_image.jpg)
MPP 600
Alternative power supply for MPD measurement devices
The MPP battery pack is used to power MPD 500 and MPD 600 partial discharge (PD) measurement devices for over 20 hours of continuous operation without the need for AC power. This enables convenient PD measurement anytime and anywhere. Interference induced via the voltage supply is also effectively avoided. The power pack includes a battery charger and power cord for recharging.
The MPP battery pack is used to power MPD 500 and MPD 600 partial discharge (PD) measurement devices for over 20 hours of continuous operation without the need for AC power. This enables convenient PD measurement anytime and anywhere. Interference induced via the voltage supply is also effectively avoided. The power pack includes a battery charger and power cord for recharging.
-main_image.jpg)
Measurement cable set
A set of six measurement cables consisting of
• Two pairs of red/black measurement cables marked with “I” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• One pair of red/black measurement cables marked with “V” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• Two pairs of red/black measurement cables marked with “I” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
• One pair of red/black measurement cables marked with “V” with 2.5mm² / AWG 14
• and 6m / 19.5 ft or 10m / 32 ft length
Dërgo direkt kërkesën tënde për produkte dhe stafi ynë do t'ju kontaktojë për t'ju dhënë të gjithë informacionin përkatës.
Përse të zgjidhni produktet tona?
- Cilësi e lartë
- Rezistent ndaj faktorëve të mjedisit
- Çmim konkurues në treg