Produktet
-main_image.jpg)
Flow Meter
- Maximum chemical resistance by the use of PVDF and PTFE
- No electrical conductivity of the medium is needed
- Measurement above stroke volumes of approx. 30 µl
- Detection of gas bubbles in the feed chemical
- No bottlenecks in the measuring tube. Media with small undissolved particles or with increased viscosity can be measured
- A 0/4 -20 mA current output and a frequency output are available for remote transmission of the measured values.
-main_image.jpg)
Stepper Motor-driven Diaphragm Dosing Pumps
Stepper motor-driven diaphragm pumps are particularly suitable for highly accurate, reproducible industrial dosing thanks to their design. Many fluid media can be safely fed into the respective processes using these pumps.
The stepper-motor with its wear-free tooth belt drive, ensures a particularly homogeneous and gentle dosing process.
The stepper-motor with its wear-free tooth belt drive, ensures a particularly homogeneous and gentle dosing process.
-main_image.jpg)
Motor-driven Piston Dosing Pumps
Piston dosing pumps are particularly precise dosing units, which are not dependent on pressure. Dosing capacity varies proportionally with the stroke length and can be set to the tiniest repeatable quantities. Two-piston and multiple-piston pumps are therefore particularly suitable for delivering precise mixtures, where different media must be mixed at a constant ratio which can be selected as desired. Using externally controlled drive motors, the total quantity can be varied from 5% to 100% at a constant ratio. Heated heads allow the dosing of media that are torpid when cold. A piston flushing skirt is available as an option, to prevent damaging leaks and protect the packing materials and pistons from abrasive chemicals.
-main_image.jpg)
Motor-driven Diaphragm Dosing Pumps
Diaphragm dosing pumps are leak-free, and are therefore suitable for highly aggressive or toxic media. Depending on the gear type, the diaphragm allows pressures up to 16 bar. Diaphragm dosing pumps are fitted with a separation chamber as standard. If a crack forms in the diaphragm due to wear, this prevents the medium from flooding the system components or the pump itself. The medium is controlled and flows through a downpipe to the collecting basin. The medium sides of the diaphragms are coated with PTFE.
-main_image.jpg)
Solenoid-Diaphragm Dosing Pumps
Diaphragm dosing pumps are leak-free, and are therefore suitable for highly aggressive or toxic media. Depending on the gear type, the diaphragm allows pressures up to 16 bar. Diaphragm dosing pumps are fitted with a separation chamber as standard. If a crack forms in the diaphragm due to wear, this prevents the medium from flooding the system components or the pump itself. The medium is controlled and flows through a downpipe to the collecting basin. The medium sides of the diaphragms are coated with PTFE.
-main_image.jpg)
-main_image.jpg)
Dërgo direkt kërkesën tënde për produkte dhe stafi ynë do t'ju kontaktojë për t'ju dhënë të gjithë informacionin përkatës.
Përse të zgjidhni produktet tona?
- Cilësi e lartë
- Rezistent ndaj faktorëve të mjedisit
- Çmim konkurues në treg